Slitters and Used Slitters for Sale, Buy Used Slitters Rewinders for Sale and Rebuilt Slitters, Rebuilt Slitters Rewinders and Used Slitters  
Benick Machineworks
New Life for Used Machinery
Home Used Machinery New Machinery Our Services Slitter Parts Videos Picture Gallery Recent Projects About Us Contact Us

  

  Machine: 18744 Simplex Slitters
Arrow model 2000, rewind diameter of 96", cup stock slitter
  Maker: Arrow
  Width: 64 ''

64" wide Arrow Mdl 2000T-9 Center Surface slitter rewinder. Separate Jagenberg shaftless unwind floor pick up via screw and electric motors. Montalvo pneumatic brakes. Edge guide system. Dover Flexo P3 Auto tension control. Six (6) Tidland Class 11 shear knife assemblies. 4" Min. slit width. Dual Bowed roll for positive separation after slitting. 3" and 6" rewind shafts. 96" OD rewind capacity. Max. roll weight 8,000#. Can be used paper, nonwoven up to heavy board. Single motor Reliance 60 HP VS drive system. Rated 2000 FPM. Good operating condition. Includes complete set of engineering, maintenance and parts documentation.
The design of the Mdl 2000 enables winding at a constant surface pressure regardless of roll weight. Pneumatic cylinders load the driven 8.625" diam. winding drum against the rewinding roll. As the roll diameter increases, the winding drum is deflected about its pivot point and this motion is detected by a hydraulic 4 way valve with a feeler roll. This valve controls the movement of the hydraulic cylindefrs on the rewind arms as they are positioned to neutralize the effect of the roll diam and weight build up.
The rewind clutch is used to control winding torque. Any or all of the independent friction elements can be actuated thus having an effect on torque output. Also clutch pressure can be regulated on the pneumatic control panel. This provides an adjustment to compensate for variations in products being run.