Benick Machineworks is
well known as the reliable source for used slitters. Our staff has the technical
capability and experience to help you solve your slitting problems.
We offer 4 levels of
support with used slitters:
Level 1. We can sell you a used
machine under the same conditions you are used to seeing with most used
machine brokers. In the industry this is known as “as is, where is”; a
modern phrase for Hammurabi’s famous code, “Buyer Beware.” We don’t
believe this is the best way to buy or sell a used machine, but if you are
not uncomfortable with this approach we can sell you a used machine in
the condition it is currently in. This option is available either when we
own the slitter, or when we are brokering it for the owner.
Next, we offer our “Level Two” Benick option. If you
choose the “level two” option when buying a machine from Benick we will
bring it under power, clean and test it, and if you wish modify it to
perform your particular slitting needs. The machine may not look great but
will perform your needs for a lower price.
Want more? We
offer our “Level Three”
option. In this case we “replace or repair parts we consider worn or
defective". This does not mean a bearing or belt may not wear out, but it
does mean we have gone over the machine and used common sense and
experience to bring it into a higher level of condition than when we
received it. Under this option you may choose to have the machine cleaned
and painted. You may or may not choose to upgrade the drive and controls.
a new machine? We offer our “Level Four”
option. This is our Like Newmachine. We strip the machine, replace all bearings, belts, pulleys,
wiring, hoses, etc. The machine is sanded and painted and new drives and
controls are installed. Of course we offer our ability to modify the
machine as needed and our technical consulting. We usually can provide a
machine like this for about half the price of new and in half the time. As
for technical support, our customers call us for years after a purchase
and we provide unequalled technical support. Remember, we ran slitters
for many years and have the know how to solve your slitting problems.
Check Out Some More
Samples Of Our Work- Click An Item Below